Velleman-projects K2636 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 4)

Assembly hints

1.3 Soldering Hints :

1- Mount the component against the PCB surface and carefully solder the leads

2- Make sure the solder joints are cone-shaped and shiny

3- Trim excess leads as close as possible to the solder joint

REMOVE THEM FROM THE TAPE ONE AT A TIME !

AXIAL COMPONENTS ARE TAPED IN THE

CORRECT MOUNTING SEQUENCE !

 You will find the colour code for the resistances and the LEDs on our website:

http://www.velleman.be/common/service.aspx