Velleman-projects K2636 Assembly instructions Manuel d'utilisateur Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
8
M
110 - 240VAC
MAINSLOADVAC
N
LL
N
L
N
Test & connection
ATTENTION:
A PART OF THE CIRCUIT IS ALWAYS UNDER MAIN
VOLTAGE. TAKE ALL POSSIBLE PRECAUTIONS, SO
THAT NO-ONE CAN TOUCH ANY PART. FOR YOUR
OWN SECURITY AS FOR THE USERS' SECURITY.
MOUNT THIS KIT PREFERABLY IN AN ISOLATING
HOUSING. THE FUSE WILL MELT IN CASE OF AN OVER-
LOAD, REPLACE IT BY EXACTLY THE SAME TYPE.
Connect the load to the screw connector marked by "LOAD" see fig. 1. Consider the max. load (5,5A)
Connect the mains voltage on the screw connector "MAINS".
See whether you have mounted the right jumper (J1 or J2).
The power voltage for the load is put on the connector. "VAC" (24 … 240VAC).
See that this voltage and the "MAINS" voltage have the same frequency and that they are either in phase
or in the opposite phase. Owing to the fact that the supply voltages of the load and the control circuit are
completely separated, one can also connect low voltage loads. This makes this circuits fits for regulations
in swimming pools, outdoors ect...
17. Test & connection
Fig 1.0
N
L
N
L N
L
M
8
M
110 - 240VAC
MAINSLOADVAC
N
LL
N
L
N
Test & connection
ATTENTION:
A PART OF THE CIRCUIT IS ALWAYS UNDER MAIN
VOLTAGE. TAKE ALL POSSIBLE PRECAUTIONS, SO
THAT NO-ONE CAN TOUCH ANY PART. FOR YOUR
OWN SECURITY AS FOR THE USERS' SECURITY.
MOUNT THIS KIT PREFERABLY IN AN ISOLATING
HOUSING. THE FUSE WILL MELT IN CASE OF AN OVER-
LOAD, REPLACE IT BY EXACTLY THE SAME TYPE.
Connect the load to the screw connector marked by "LOAD" see fig. 1. Consider the max. load (5,5A)
Connect the mains voltage on the screw connector "MAINS".
See whether you have mounted the right jumper (J1 or J2).
The power voltage for the load is put on the connector. "VAC" (24 … 240VAC).
See that this voltage and the "MAINS" voltage have the same frequency and that they are either in phase
or in the opposite phase. Owing to the fact that the supply voltages of the load and the control circuit are
completely separated, one can also connect low voltage loads. This makes this circuits fits for regulations
in swimming pools, outdoors ect...
17. Test & connection
Fig 1.0
N
L
N
L N
L
M
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire