Velleman-projects K8008 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 5)

Assembly hints

1.3 Soldering Hints :

1- Mount the component against the PCB surface and carefully solder the leads

2- Make sure the solder joints are cone-shaped and shiny

3- Trim excess leads as close as possible to the solder joint

REMOVE THEM FROM THE TAPE ONE AT A TIME !

AXIAL COMPONENTS ARE TAPED IN THE

CORRECT MOUNTING SEQUENCE !

 You will find the colour code for the resistances and the LEDs in the HALG

(general manual) and on our website: http://www.velleman.be/common/service.aspx

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Velleman-projects K8008 Assembly instructions Manuel d'utilisateur Page 5