Velleman-projects K8008 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 11)

Blinking circuit

with timer

Push to start the blinking action as described above. At release, the timer will start. When time

elapses, the load is turned off. A push during on-time restarts the timer.

Applications : warning lights, buzzers, …

Random timer

As long as the button is closed, the system will activate the output in a random manner (9 min-

utes to 2.5h between every transition). Initial load status at activation is also determined at

random.

Applications : Simulate presence at home during absence

Trigger-at-

release timer

The load will be turned on when the pushbutton is released. At release, the timer is

started. When time elapses, output is turned off. Pushing again during on-time will restart

the timer at release of the button.

Applications : Ventilation of restrooms, restroom flush control, …

Interruptible

Real Time

staircase timer

Press briefly to activate interval 1, a prolonged push will activate interval 2. The charge will

be neutralised after the interval, even if the button remains pressed down. Pressing the

button briefly while the charge is activated will immediately neutralise this charge.

applications : staircase light control, attics, basements, stores and warehouses

Learning

mode

(*) The learning mode allows you to fix the duration of delay1 and delay2. See further for

instructions on how to use this mode.

Operating mode

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Velleman-projects K8008 Assembly instructions Manuel d'utilisateur Page 11