Velleman-projects EDU05 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 11)

EDU05 Test procedure & programming in Visual Basic 2010 ( Version 1.0)

Disable the demo:

• Switch on “Disable Startup Demo”

• Disconnect the software

• Disconnect the USB cable of the board.

When you re-connect the USB cable you’ll see that demo has been disabled.

Enable the demo:

• Connect the USB cable with the board & PC *

• Run the “Test & diagnosis” software

• Connect the software

• Switch off “Disable Startup Demo”

* Because the start-up demo is disabled, you don’t need to press button “8” on the board to start the

communication with the PC.

1 2 ... 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Velleman-projects EDU05 Assembly instructions Manuel d'utilisateur Page 11