Velleman-projects EDU05 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 10)

EDU05 Test procedure & programming in Visual Basic 2010 ( Version 1.0)

Start the “Test & diagnosis” software and click the “Connect” button to connect the board with the

software.

1 Connect and Disconnect buttons to connect/disconnect

the board with the PC via the USB cable

2 Digital in

output selection

Input selected: each time you push a button on the board, it is

shown on the screen

Output selected:

each action you make in the software screen is

shown on the board

nalog In

The bars indicate changes in the values of the potentiometers, LDR,

NTC and temperature sensor on the board.

4PWM Out

This acts like a regulation of an output value. (1) changes the LCD

contrast, and (2) changes the LCD brightness.

5 Set All Digital / Clear All Digital

The digital is represented by the LEDs on the board.

Disable the Start-up demo of the board

Adding or erasing text on the LCD-display

Clear the text on

the display

Type your text here Set the

position of

the text

Show the text on

the display

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Velleman-projects EDU05 Assembly instructions Manuel d'utilisateur Page 10