Velleman-projects K5600R Assembly instructions Manuel d'utilisateur télécharger pdf (Page 3)

__________________________________________________________________________________________________________________________________________________________

ASSEMBLY STEPS

Required tools to assemble the kit:

Use a small soldering iron of max. 40W.

Use thin (1mm) solder, do not use any flux.

Use a small cutter to trim the excess wires.

Mount the compo-

nents against the

PCB surface and

carefully solder the

leads in place.

Obtain cone- shaped,

shiny soldered joints

by heating up the

component leads suf-

ficiently.

This solder joint

results in a bad

connection.

Trim the excess

wires up to the

level of the sol-

der

• Careless assembly will certainly lead to problems.

• Insert the part, oriented correctly, into its correct holes in the PCB.

• Mount the components in the correct order as stated in this manual.

• Do NOT remove the components from the tape, as they are in the cor-

rect mounting order.

• The component values in the circuit diagram are for reference only.

The values in this parts list are correct and must be followed.

• Use the boxes q to check off your progress.

FBefore starting to build, read also the general guidelines

How the display is build:

1. Mount the components (sections 1 to 11).

2. Make a draft of your text, using the template on page 9. The display consists of

12 user definable characters. Depending on the wanted character, one must

mount the LED’s at the appropriate position, see page 7.

3. The not used LED positions, must then be shunted by means of a piece of

jumpwire.

1 2 3 4 5 6 7 8 ... 13 14

Commentaires sur ces manuels

Pas de commentaire

Velleman-projects K5600R Assembly instructions Manuel d'utilisateur Page 3

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Velleman-projects K5600R Assembly instructions