Velleman-projects K5600R Assembly instructions Manuel d'utilisateur télécharger pdf (Page 14)

_______________________________________________________________________________________________________________________________________________________

14.MOUNTING INTO THE OPTIONAL HOUSING

A special housing can be ordered, type: B5600

• Disassemble the housing by removing the front and side panels.

• Drill a pass through hole into the housing where supply wire is desired (side,

back, top, bottom…).

• In a master / slave configuration, drill also a pass through hole into the housing

where interconnection wires are needed.

• An extra hole can be made, if easy access to the speed adjustment potenti-

ometer is desired.

• Slide the PCB into the lower slot.

• Slide in the side panels.

• Mount the front panel.

IMPORTANT: If the unit is used with a power supply higher than 15V, then

ventilation holes must be made in the bottom and top part of the housing!

1 2 ... 9 10 11 12 13 14

ADVERTISEMENT LED DISPLAY 1
COLOR= 2… 5 2
CHARACTER1 4
CHARACTER12 4
(Check the polarity!) 6
7. ELECTROLYTIC CAPACITOR 7
To MAINS 12

Commentaires sur ces manuels

Pas de commentaire

Velleman-projects K5600R Assembly instructions Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Velleman-projects K5600R Assembly instructions