Velleman-projects K8012 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 9)

-3- Put SW2 in the 12V position, put SW1 in the >4Ah position. Connect

the supplied 33Ω/5Ω resistor to the output terminals. Measure the

voltage across the resistor.

It should read 14.7V +/- 0.1V

-4- Put SW2 in the 6V position, put SW1 in the >4Ah position. Connect

the supplied 33Ω/5Ω resistor to the output terminals. Measure the

voltage across the resistor. It should read 7.3V +/- 0.1V

Testing

Fig. 4.0

Fig. 3.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Pas de commentaire

Velleman-projects K8012 Assembly instructions Manuel d'utilisateur Page 9