Velleman-projects K6714 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 10)

Connect the phase to “0” and the Neutral to “125” or “220”, depending on the

mains voltage.

Normally the POWER ON LED should be lit now.

In case no manual operation has been provided, you can test the relay by

connecting the inputs (terminals 1 trough 16) to earth (GND) one after another.

Connections possibility's :

1. Connect the board to the 15 channel receiver K6711 (see Fig. 1.0)

FIG 1.0

17. TEST AND CONNECTIONS :

Test and connections

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Velleman-projects K6714 Assembly instructions Manuel d'utilisateur Page 10