Velleman-projects EDU09 Assembly instructions Manuel d'utilisateur télécharger pdf (Page 10)

- 10 -

Assembly

II. SOFTWARE INSTALLATION

Step 1: Download the EDU09 software on our website: www.vellemanprojects.eu

Step 4: Accept the license argeement

Mounting the test leads

STEP 1: Cut off the banana plug from the test

leads.

STEP 3: Solder the wires.

Tip: Start with one cable and then do the other.

Step 5: Solder the cables on the PCB.

STEP 2: Strip both cables

and twist the wire ends of each

cable.

STEP 4: Mount both cables as shown in the

drawing.

Step 2:opentheleenselectthesoftware.

Step 3: Select “next” to begin the installation

procedure.

Step 5: Select the destination on your PC

EP 3:

Solder the wires.

EP 2:

Strip both cables

and twist the wire ends of each

cable.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

Velleman-projects EDU09 Assembly instructions Manuel d'utilisateur Page 10